2010 Jeep Wrangler
Mileage
115,609
Service Date
2/21/2024
Services Performed
- PERFORM FULL SCAN. FOUND MULTIPLE CODES WITH ABS. C100A – LF WHEEL SENSOR CIR, C1015 – RF WHEEL SENSOR, C1020 – LR WHEEL SENSOR, C102B – RR WHEEL SENSOR, C2200 – ABS INTERNAL, CHECKED POWER AND GROUND TO SENSORS ALL OK, BRAKE FLUID LEVEL OK, PERFORM BLEED SEQ FOR ABS AND ALSO ABS MODULE CALIBRATION AND FAILED. FOUND ABS MODULE BAD.
- ABS CONTROL MODULE – Remove & Replace
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Lubricate and check chassis Change oil and oil filter. Check air filter and wiper blades Check all fluid levels and tire pressures. Check belts and hoses Check Front brake and check steering Preform basic safety inspection. APPROVED: BMW LL01; MB-APP 229.5; VW 502.00/505.00
- Road test for power steering operation. Inspect system for leaks. Flush power steering lines, pump, rack and pinion, and or gear box. Install new power steering fluid. Road test vehicle.
- FRONT 35 REAR 35 (IN PSI UNIT) INSPECT TIRES AND ADJUST/INFLATE TIRE PRESSURE
- BRAKE INSPECTION:FRONT ( 6 mm) REAR ( 10 mm) LINING REMAINING
- PERFORM BATTERY TEST – PASSED
- PERFORM MULTI INSPECTION
- RESET REMINDER( ) REMINDER STICKER ( ) INSTALL PPE ( ) POST DELIVERY CHECK ( ) REMOVE PPE ( ) TEST DRIVE ( 15 ) MILES
GINA O. gave our service a 5 star review on 3/20/2024
